Valuable Tips in Baling Hay
It’s easy to recognise a net wrap for hay when you see one. The plastic bale stacker looks very much like an ordinary bale of hay. But in fact, they are entirely different. The baling stacker holds several bales at a time. Some bales are for use in hay barns and not on the farm at all.
When you buy bales to be stored outside, you want to be sure that they are correctly sized for the outside climate, which is why net wrap Adelaide is a sensible option. Bales stacked with too many bales will begin to rot and deteriorate more quickly than they would if they were stored in a smaller space. And some parcels can be mite-proof.
When you buy hay bales for the hay barn, you want to be sure that they are easily trimmed and shaped. A bale that is too long or too short will need to be removed from the stack before it matures and rots. A bale that is not mite-proof or rounded ends up tangling and splitting at the edges. If you think about it, most hay bales are simply stacked.
So when you buy bales for hay bales, you want to buy the ones that will be easiest to stack and handle. Look for sizes that are the same as the bales that will be stored indoors. There is no point in buying a more massive bale than what you need since you can simply use less of it to produce the same volume of hay.
You want to look for bales that are mite-proof and shaped to the best advantage. They must be very firm when they are inside the bales. It is so the bales can be trimmed without damage to the net. The bales should also be slightly curved, and the long sides should be shorter than the bottom. That way, the bales can be pulled up and stacked without any problems.
As you are folding the bales, it’s essential to be careful that you don’t cut the baling as you go. You should only flip one side down before moving on to the next side. If you have any issues with the bales falling apart at the edges while you are folding, you might need to adjust the bend radius of the baling. It’ll take a few seconds, and you can do it without interrupting the hay bale stacker.
You also must scrutinise the baling. Make sure that it is tight, and that the bends are centred over the bales. Your first reaction may be to say that the baling is too loose, but that would be a mistake. You want the baling to be tight. This will keep the bales from becoming twisted or torn during the folding process.
You don’t want to have any bales that are distorted, so it’s best to use net wrap Adelaide. It can be easy to bend a bale, especially one that has a high bend radius. A bent bale can cause a bunch of bales to twist and break at the seams. If you make the bend with the least amount of force possible, it will be less likely to happen.
After you’ve inspected the baling, you will want to go over the net wrap for hay to make sure that the wrinkles are as little as possible. Lines are fine, provided they are not so large that they interfere with proper folding. Otherwise, you could damage the net wraps and even the bales they are wrapped around.
After you have taken care of the wrinkles, you will need to check the shape of the bales. Measure the number of bales you will be storing, and use that number for the bend radius.